> Products > Penstock Gate > Cast Iron Penstock Gate > Cast Iron Round And Square Penstock Gate

Cast Iron Round And Square Penstock Gate

FYL specialized in manufacture different Cast Iron Round And Square Penstock Gate in China. Our company available to provide OEM product according to clients require. We offer competitive price and look forward to become your long-term supplier in China.

Send Inquiry

Product Description

Cast Iron Round And Square Penstock Gate

FYL Cast Iron Round And Square Penstock Gate made in China is generally composed of transmissions, supports, screw rods, gates, door frames, wedges and other components. It can be used to cut off, dredge or adjust the water level on water treatment structures such as pipelines and intersection inspection wells, mud and sand tanks, sewage channels, pump station water inlets, and clear water tanks. It can also be used in agricultural drainage and irrigation or other water conservancy facilities. It is used in combination with manual, electric and other hoists.

Cast Iron Round And Square Penstock Gate Feature

The door frame and gate are made of high-quality gray cast iron or nodular cast iron. The guide rails are arranged symmetrically on the left and right and connected with the ends of the two sides of the door frame with stainless steel bolt positioning pins (for small and medium-sized gates, the guide rails can be integrated with the door frame). The length of the guide rail is generally 1/2 to 1/3 of the full opening height of the gate, so the overall structure has high strength, high rigidity, good wear resistance, corrosion resistance, and large pressure bearing capacity.

The sealing is achieved through the wedge tightness of the wedge device. The sealing material is copper inlaid strip or rubber, which is precisely processed and ground, so the sealing performance is good.

The gate hoist can be operated by manpower, electric motor or pneumatic device. The hydraulic mechanism drives the gear, worm gear and worm gear of the transmission device to run, and drives the transmission nut or screw to rotate the gate shaft to make vertical lifting movement, thereby opening or closing the gate to achieve water and shut-off. Water or water level adjustment purposes.

Install notes

No matter what type of cast iron round penstock gate, if it is a small gate, such as DN200mm, DN300mm, DN400mm, etc. It is usually not recommended to install the door frame and the door body separately. Usually, the overall installation is used, because the separate installation may cause problems during the installation process. In the middle, the door frame is deformed, which causes problems such as water leakage or hoist do not work.

Round Type Penstock

Actual size and structure depends on customer request

Ø200-Ø1200 Round Type Size

Type	Size D	Install Size（mm）							Operation（1）	Water level（m）
Type	Size D	A	B	D1	H	F	n×d	Ø1	Operation（1）	Water level（m）
MXY-200	200	382	210	230	450	100	4×M16	18	0.5	4
MXY-250	250	426	250	280	550	100	4×M18	20	0.5	4
MXY-300	300	494	300	330	650	100	4×M20	22	0.5	4
MXY-400	400	586	400	430	800	100	4×M22	24	1	4
MXY-450	450	642	450	482	900	110	4×M22	24	1	4
MXY-500	500	706	500	534	1000	110	4×M24	28	1	4
MXY-600	600	826	600	636	1200	120	4×M24	28	2	6
MXY-700	700	940	700	738	1400	120	4×M24	28	2	6
MXY-800	800	1040	800	840	1600	120	4×M27	32	2	6
MXY-900	900	1290	900	950	1800	120	4×M27	32	3	6
MXY-1000	1000	1380	1000	1050	2000	140	4×M30	35	3	6
MXY-1200	1200	1600	1200	1250	2400	140	4×M36	42	3	6

Ø1400-Ø2000 Round Type size

Type	Size D	Install Size（mm）						Operation（1）	Water Level（m）
Type	Size D	B	D1	F	Ød	H	n×d	Operation（1）	Water Level（m）
MXY-1400	1400	1570	1400	80	28	2300	4×525	3	6
MXY-1500	1500	1680	1540	100	28	2500	4×575	5	6
MXY-1600	1600	1780	1640	100	28	2600	4×600	5	6
MXY-1700	1700	1880	1740	100	28	2800	4×650	5	6
MXY-1800	1800	1980	1840	100	28	2600	4×675	8	6
MXY-1900	1900	2100	1940	120	28	3100	4×725	8	6
MXY-2000	2000	2200	2040	120	28	3200	4×750	8	6